使用回调在Inno设置中显示来自外部解压缩dll的文件名

Using callback to display filenames from external decompression dll in Inno Setup


使用回调在Inno设置中显示来自外部解压缩dll的文件名 已获得1个解决方法 2020-08-18 18:08:49 c

原本在这里问,但被要求作为一个单独的问题提交.

我在下面的C中编码了以下dll,我在Inno安装程序中使用该dll来提取游戏文件.这是游戏的替换安装程序,该游戏最初使用16位安装程序,文件从cd-rom中复制出来.我希望能够使用InnoTools InnoCallback来显示使用我的dll提取的文件名,但是由于这是我第一次尝试C编码,所以我不知道该怎么做.此功能的示例如下: http://freearc.org/InnoSetup.aspx

我希望能够使用来自外部dll的文件名设置WizardForm.FilenameLabel.Caption.

我的Inno设置脚本的相关部分:

function VolEx( filename, outputpath: String ): Integer; external 'VolEx@files:volex.dll stdcall';

(驱动程序是cd-rom的路径,即 “D:\”,因此输出当前显示为 “D:\ world \ archive.vol”.我的目标输出是 “C:\ game-path \ world \ archive \ file.ext”)

procedure VolExtract();
begin
  if not DirExists(WizardDirValue() + '\' + Worlds[w]) then
  begin
    CreateDir(WizardDirValue() + '\' + Worlds[w]);
  end;
  for n := 0 to 3 do begin
    WizardForm.FilenameLabel.Caption := DriveLetter + Worlds[w] + '\' + Reslists[n] + '.vol';

    if VolEx(DriveLetter + Worlds[w] + '\' + Reslists[n] + '.vol', WizardDirValue() + '\' + Worlds[w] + '\' + Reslists[n]) <> 0 then
    begin
      // Handle Fail
      MsgBox(CustomMessage('FileErr'), mbInformation, MB_OK);
      WizardForm.Close;
    end;

VolEx.c (此处包含blast.c和blast.h: https://github.com/madler/zlib/tree/master/contrib/blast )

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <limits.h>
#include <sys/stat.h>
#include <time.h>
#include <utime.h>
#include "blast.h"

#define local static
#define VOLID "RESLIST"

struct inbuf {
    unsigned long left;
    unsigned char *buf;
    unsigned size;
    FILE *in;
};

struct stat statbuf;
time_t mtime;
time_t voltime;
struct utimbuf new_times;

local unsigned inf(void *how, unsigned char **buf)
{
    unsigned len;
    struct inbuf *inb = how;

    len = inb->size > inb->left ? inb->left : inb->size;
    len = fread(inb->buf, 1, len, inb->in);
    inb->left -= len;
    *buf = inb->buf;
    return len;
}

local int outf(void *how, unsigned char *buf, unsigned len)
{
    return fwrite(buf, 1, len, (FILE *)how) != len;
}

#define BUFSIZE 16384   /* must fit in unsigned */

local int extract(char *name, unsigned long len, FILE *in, const char *path, time_t prevtime)
{
    int err;
    FILE *out;
    struct inbuf inb;
    unsigned char buf[BUFSIZE];

    inb.left = len;
    inb.buf = buf;
    inb.size = BUFSIZE;
    inb.in = in;
    mkdir(path);
    char outPath[strlen(path) + 20];
    strcpy(outPath, path);
    strcat(outPath, "\\");
    strcat(outPath, name);
    out = fopen(outPath, "wb");
    if (out == NULL)
        return 2;
    err = blast(inf, &inb, outf, out);
    fclose(out);
    if (stat(outPath, &statbuf) < 0) {
        perror(outPath);
        return 1;
    }
    mtime = statbuf.st_mtime; /* seconds since the epoch */

    new_times.actime = statbuf.st_atime; /* keep atime unchanged */
    new_times.modtime = prevtime;    /* set mtime to current time */
    if (utime(outPath, &new_times) < 0) {
        perror(outPath);
        return 1;
    }
    return err;
}

int __stdcall __declspec(dllexport) VolEx(const char *filename, const char *outputpath)
{
    FILE *in = fopen(filename,"rb");
    unsigned long off, next;
    int err;
    unsigned char head[24];

    if (stat(filename, &statbuf) < 0) {
        perror(filename);
        return 1;
    }
    voltime = statbuf.st_mtime; /* seconds since the epoch */

    if (fread(head, 1, 8, in) != 8 || memcmp(head, VOLID, 8)) {
        /* fprintf(stderr, "not the expected .vol format\n"); */
        return 1;
    }
    off = 8;
    while ((next = fread(head, 1, 24, in)) == 24) {
        off += 24;
        next = head[20] + (head[21] << 8) + ((unsigned long)(head[22]) << 16) +
           ((unsigned long)(head[23]) << 24);

        head[20] = 0;
        err = extract((char *)head, next - off, in, outputpath, voltime);
        if (err) {
            /* fprintf(stderr, "extraction error %d on %s\n", err, head); */
            return 1;
        }
        off = next;
    }
    /* if (next)
        fprintf(stderr, "%lu bytes ignored at the end\n", next); */
    return 0;
}

使用回调在Inno设置中显示来自外部解压缩dll的文件名 方法1

看看InnoTools Callback中包含的示例脚本.

这是非常简单的,您只需声明这样的过程 (再次,假设您正在使用ANSI Inno-某些类型必须为Unicode版本更改):

[Code]
type
    TMyCallback = procedure(Filename: PChar);

function WrapMyCallback(Callback: TMyCallback; ParamCount: Integer): LongWord;
    external 'WrapCallback@files:innocallback.dll stdcall';

procedure DoSomethingInTheDll(Blah: Integer; Foo: String; ...; Callback: LongWord);
    external 'DoSomethingInTheDll@files:mydll.dll stdcall';

procedure MyCallback(Filename: PChar);
begin
    // do whatever, eg. update the filename label
end;

// wherever you're about to call your DLL
var Callback : LongWord;
// ...
    Callback := WrapMyCallback(@MyCallback, 1); // 1 parameter
    // pass the callback to your DLL either via a dedicated function
    // or as a parameter of your existing function
    DoSomethingInTheDll(blah, foo, ..., Callback);

在DLL方面:

typedef void (__stdcall *MyCallback)(const char *filename);

然后,您可以在函数参数中声明类型为 MyCallback 的变量,然后将它们称为本地C函数,它将在Inno脚本中运行代码.

void __stdcall __declspec(dllexport)
    DoSomethingInTheDll(int blah, const char *foo, ..., MyCallback callback)
{
    // ...
    callback(foo);
}

.htaccess .net .net-core 2d 3d 3d-printing ab-initio abp abstract-syntax-tree actions-on-google actionscript-3 active-directory activemq activemq-artemis acumatica adobe-xd aframe ag-grid agora.io air airflow ajax akka alert alexa algorithm alignment allure amadeus amazon-cloudformation